Cleanroom Gowning
Cleanroom Garments, Headwear, Shoe Covers and Sleeves
Sucatec supplies disposable and reusable cleanroom gowning products for contamination control in pharmaceutical, semiconductor, medical device, electronics and precision manufacturing environments. Coverage includes coveralls, frocks, headwear, shoe covers and sleeve covers in a range of materials and cleanroom classifications.
Full-body gowning and personal contamination control
Cleanroom garments are a core part of any contamination control programme. Sucatec supplies disposable and reusable gowning items to support operator protection and process integrity across ISO Class 3 to 8 environments.
Coveralls and Suits
Full-body cleanroom coveralls and frocks provide the highest level of operator-borne contamination control. Disposable options are suited to visitor gowning and lower-frequency entry. Reusable garments are typically used in continuous production environments with controlled laundering programmes.
Disposable Coveralls
Single-use full-body coveralls in SMS, microporous or spunbond polypropylene. Suitable for ISO Class 5–8 environments, visitor gowning and lower-classification production areas. Hood-attached and separate hood options available.
Reusable Cleanroom Suits
Laundered cleanroom suits and frocks in woven polyester or nylon fabric for ISO Class 3–6 environments. Low particle generation, antistatic options available. Designed for repeated autoclave or cleanroom laundry cycles.
Frocks and Lab Coats
Cleanroom frocks, lab coats and visitor gowns for partial-body coverage in less critical areas. Disposable and reusable variants available. Snap, zip and tie-back closure options.
Size range: XS to 3XL (disposable); S to XXL (reusable, subject to product). Closure: Zip, snap or tie-back. Materials: SMS, microporous film laminate, spunbond PP (disposable); woven polyester / nylon (reusable). Class: ISO 3–8 depending on material and construction.
Headwear
Cleanroom headwear controls contamination from hair, scalp and face. Product selection depends on cleanroom classification, gowning protocol and whether full or partial head coverage is required.
Cleanroom Hoods
Full hoods providing complete head, neck and shoulder coverage for higher-classification cleanroom gowning. Available in disposable non-woven and reusable woven polyester. Often used with separate or attached face mask and suit.
Bouffant Caps and Hair Covers
Disposable bouffant caps, mob caps and hair covers for hair containment in ISO Class 5–8 environments. Spunbond PP or SMS construction. One-size-fits-most with elasticated edge. Available in a range of diameters.
Beard Covers
Disposable beard covers and snoods for facial hair containment. Non-woven construction, elasticated or tie-on fitting. Used in conjunction with standard headwear where beard contamination control is required.
Size range: One size fits most (bouffant caps); S/M/L available for hoods. Materials: SMS, spunbond PP (disposable); woven polyester (reusable hoods). Class: ISO 3–8 depending on product type.
Shoe Covers and Booties
Cleanroom shoe covers and overshoes control floor-borne contamination introduced from footwear. Selection depends on classification, floor type, slip requirements and whether anti-static properties are needed.
Disposable Shoe Covers and Overshoes
Single-use shoe covers in SMS, CPE (polyethylene) or microporous material. Elasticated opening with slip-resistant sole treatment. Available with anti-static properties where ESD floor grounding is required. Suitable for ISO Class 5–8 and visitor gowning.
Cleanroom Booties and Overshoes
Reusable cleanroom booties in laundered woven polyester or antistatic fabric for higher-classification environments. Slip-resistant or conductive sole options. Sized S to XL. Compatible with cleanroom laundry cycles.
Size range: One size fits most and Large (disposable); S to XL (reusable). Materials: SMS, CPE, microporous (disposable); woven polyester, antistatic fabric (reusable). Options: Anti-static, slip-resistant sole, tie or elastic closure.
Sleeve Covers
Cleanroom sleeve covers provide localised arm and forearm protection without requiring a full garment change. They are used in assembly, handling, filling and processing tasks where additional arm coverage is needed over an existing suit or frock.
Disposable Sleeve Covers
Single-use sleeve covers in SMS or microporous material for ISO Class 5–8 environments. Elasticated at both wrist and upper arm for secure fit. Suitable for pharmaceutical, food-grade and electronics applications where disposable local protection is preferred.
Reusable Cleanroom Sleeves
Laundered woven polyester sleeve covers for higher-classification environments. Low particle shedding, available with antistatic properties. Knitted cuff construction for comfort and wrist seal. Sized by length and diameter.
Size range: Standard and extended length (disposable); sized by length and diameter (reusable). Materials: SMS, microporous (disposable); woven polyester (reusable). Options: Antistatic, knitted cuff, elasticated.
Standards and Compliance
Cleanroom garments should be selected as part of a formal contamination control and gowning programme aligned with your facility classification under ISO 14644-1. ESD-sensitive environments may additionally require garment compliance with IEC 61340-5-1.
Where required, Sucatec can support product data sheets, Certificates of Conformity, batch information and supplier qualification documentation. See our Quality Policy and Compliance Policy.
Related Cleanroom Products
Cleanroom PPE Cleanroom Gloves Cleanroom Face Masks Cleanroom Wipers Mopping Systems Cleanroom Goggles ESD Consumables
Request Cleanroom Gowning Products
Contact Sucatec for coveralls, frocks, headwear, shoe covers and sleeve covers for controlled manufacturing environments. Disposable and reusable options available.
Request a Quote